Clifford Machines & Technology
Machine RANGE » Large Mesh Welders » Cross wire Insertion

PRECUT crosswire feed system

The method of crosswire insertion is typically
decided by the following decision tree:

Decision Tree

The pre cut crosswire magazine is a gap type feeder, with picker disc eject mechanism. The single gap type crosswire feeder also includes an automatic sorter mechanism and prefeeder, with a bulk storage hopper. The magazine allows for simple adjustment for different crosswire diameters by means of a single lever.

Model Number SRH
Wire diameter: Max.
Wire diameter: Min.
16mm
4mm
Wire length: Max. 4300mm
Prefeeder system Mild steel and Stainless steel
Wire type Smooth or profiled
Bulk storage weight: Max. 2000kg

 

Model Number SPH
Wire diameter: Max.
Wire diameter: Min.
10mm
1.8mm
Wire length: Max. 4300mm
Prefeeder system Mild steel and Stainless steel
Wire type Smooth or profiled
Bulk storage weight: Max. 2000kg

 

PRE CUT CROSS WIRE MAGAZINE
PRE CUT CROSS WIRE MAGAZINE

Offcoil crosswire feed system

FEED SYSTEM
FEED SYSTEM

The offcoil crosswire feed system consists of two payoff units, crosswire drive, large inline loop accumulator and roll feed system to feed wire into the mesh welder through two sets of roller straightening units. The straightened crosswires are fed into a crosswire control magazine and are cut to length with a servo controlled shear. Wires are placed into the welding point with a series of mechanical placement pushers from the feed position on the control magazine. As an option an automatic cross wire changeover system is available.

 

Model Number OCF
Wire diameter: Max.
Wire diameter: Min.
12mm
3mm
Wire length: Max.
Wire length: Min.
4300mm
600mm