Clifford Welding Systems
Machine RANGE » Large Mesh Welders » Line Wire Feeders

The rotary linewire feeder is a free standing unit designed to allow servo controlled advance of the linewires into the welding position. The unit is equipped with individual pneumatic pressure cylinders for each linewire. The pressure elements are mounted on a dovetail rail for easy adjustment and are driven by a common splined shaft. The splined drive shaft is driven by a servo motor, mounted at the end, through a helical bevel gear reduction gearbox.

The choice of RFP or RFU is dependant on whether the customer is using pre cut or off coil line wires. Selection criteria are set out in the table here The RFP is a unit designed to index both pre cut and off coil line wires and it has a motorized traverse so that it can be placed in the optimal position for the pre cut line wire length. The RFU is used only for off coil applications.

MODEL RFP WITH TELESCOPIC GUIDE TUBES
MODEL RFP WITH TELESCOPIC GUIDE TUBES
Model Number RFP
Width between outside linewires: Max. 4200mm
Wire diameter: Max.
Wire diameter: Min.
16mm
4mm
Wire length: Max.
Wire length: Min.
12000mm
2000mm
Linewire centres: Min. 50mm
Model Number RFU
Width between outside linewires: Max. 4200mm
Wire diameter: Max.
Wire diameter: Min.
12mm
4mm
   
Linewire centres: Min. 50mm